Generac Mobile Products MTP6DZV 6" Venturi Dry Prime Trash Pump

POWERFUL & DURABLE

• High efficiency pump end with best-in-class, lowest suction/discharge height
• High performance priming system
• Handles solids up to 3 in. (76.2 mm) in diameter
• Durable steel roll cage protects pump radiator and other components from damage
• Run-Dry system for continuous operations without need for external flush water or venting

EASY TO USE

• Designed for easy service and maintenance
• LOFA CP750 digital controller with large, back-lit LCD display
• Automatic start/stop control for use with two-switch inputs
• Easy conversion to optional sound attenuated flip hood cabinet (dry prime models only)

ADDITIONAL FEATURES

• Final Tier 4 Engine
• Built-in containment for all engine fluids
• Four-corner leveling for stability and complete fuel usage
• Pad-lockable battery box
• Flip tongue no-weld, removable front plate hitch assembly
• Optional sound attenuated flip hood cabinet (dry prime models only)

ENGINE

• Deutz TD 2.9 L4 – water-cooled, turbo-charged diesel engine
  o 75 hp @ 2600 rpm
  o 4 cylinder o 2.9 Liter displacement
  o DOC only for exhaust after treatment
  o EPA Final Tier 4 approved
  o Steel, single wall fuel tank 
     •113 gal. (428 L) capacity / 100 gal. (379 L) usable 
• Fuel consumption at prime: 100% - 3.60 gph (13.6 Lph)
• Cooling system capable of operating at 120ºF (49ºC) ambient 
• Disposable air filter – paper element
• 950 CCA wet cell battery 
• 95 Amp alternator 
• Low coolant warning/shutdown

PUMP  

• Cornell 6NNT;  Venturi Dry Prime Centrifugal Pump
• Bendix compressor flow up to 13.2 CFM 
• 6 in. NPTF – suction & discharge connection
• Cast Iron ASTM A48 Class 30 pump casing Cast Iron ASTM A48, Class 30 impeller
• 2 vane, enclosed impeller
• Impeller design incorporated with deflector vanes and pumpout vanes
• Single mechanical seal, John Crane Type 1 & 2, with tungsten carbide vs silicon carbide faces
• Replaceable wear ring 
• Run-dry system for continuous operations without need for external flush water or venting
• Pump shaft - 1144 stress proof steel

PUMP PERFORMANCE

• Pump output – 2750 gpm (10409 Lpm)
• Lift suction – 28 ft. (8.5 m) • Maximum diameter of solids – 3 in. (76.2 mm)
• Impeller diameter: 10.09 in. (25.63 cm) 
• Maximum efficiency (BEP Percent) – 80% BEP Flow; 1900 gpm (7192 Lpm) 
• Total dynamic head – 150 ft. (45.72 m) 
• Intake/discharge height – 30 in. (0.76m) 
• Duty points:
  o 1400 gpm (5300 Lpm) @ 69.8 ft. (21.3 m) TDH @ 1800 RPM, 80% efficiency, NPSHR 8.2 ft. (2.5 m)
  o 2000 gpm (7571 Lpm) @ 72.8 ft. (22.2 m) TDH @ 2000 RPM, 80% efficiency, NPSHR 15.2 ft. (4.6 m)

SYSTEM CONTROLS 

• White LED lighting control panel lighting
• Standard controller – LOFA CP750
  o Large, backlit 4.3 in. (109 mm) LCD display
      • Displays engine temp, engine speed, fuel level, engine hrs., coolant temp, and oil pressure
  o Advanced automatic start/stop control for use with two-switch inputs and 4-20mA transducer
  o Configurable high and low set points control start/stop operation
  o Alarm output to signal start warning or shutdown conditions
  o Heavy-duty IP64 water-resistant key switch with booted key
  o RS485 serial interface for auxiliary equipment
  o Electronic e-stop with red LED engagement indicator light

TRAILER 

• Flip-tongue design 
• Bolt-on, replaceable front tongue mounting plate
• DOT approved LED tail, side, brake, and directional lights 
• (4) transportation tie downs capable of handling 3 in. ( 76.2 mm) trailer straps 
• Safety chains with spring loaded safety hooks 
• 2 in. (50.8 mm) adjustable ball hitch
• 6000 lb. (2722 kg) torsion axle with surge brakes 
• 2000 lb. (907 kg) tongue jack with footplate
• (2) 2000 lb. (907 kg) top wind jacks, with option to add up to (4) 
• ST225/75R15 tubeless tires – 8 ply
• UV & fade resistant, high temperature cured, black polyester power paint
• Central lifting point 
• Document holder with operating manual including the AC/DC wiring diagrams

WEIGHT & DIMENSIONS

• Trailer Mounted
  o Dry weight:  3,841 lbs. (1,742 kg)
  o Operating weight:  4,655 lbs. (2,111 kg)
  o Dimensions:  150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m)
• Skid Mount
  o Dry weight:  3,221 lbs. (1,461 kg)
  o Operating weight:  4,035 lbs. (1,830 kg)
  o Dimensions:  91.16 x 66.60 x 61.50 in. (2.32 x 1.91x 1.88 m)