Generac Mobile Products MTP4SZ 4" Wet Prime Trash Pump

POWERFUL & DURABLE

• High efficiency pump end with best-in-class, lowest suction/discharge height
• High performance priming system
• Handles solids up to 3 in. (76.2 mm) in diameter
• Durable steel roll cage protects pump radiator and other components from damage
• Run-Dry system for continuous operations without need for external flush water or venting

EASY TO USE

• Designed for easy service and maintenance
• LOFA CP750 digital controller with large, back-lit LCD display
• Automatic start/stop control for use with two-switch inputs

ADDITIONAL FEATURES

• Built-in containment for all engine fluids
• Four-corner leveling for stability and complete fuel usage
• Pad-lockable battery box
• Flip tongue no-weld, removable front plate hitch assembly

ENGINE

• Deutz TD 2.9 L4 – water-cooled, naturally aspirated diesel engine
  o 49 hp @ 2600 rpm
  o 4 cylinder
  o 2.9 Liter displacement
  o DOC only for exhaust after treatment
  o EPA Final Tier 4 approved
  o Steel, single wall fuel tank 
      • 113 gal. (428 L) capacity / 100 gal. (379 L) usable
• Fuel consumption at prime: 100% - 2.30 gph (8.71 Lph)
• Cooling system capable of operating at 120ºF (49ºC) ambient 
• Disposable air filter – paper element 
• 950 CCA wet cell battery 
• 95 Amp alternator
• Low coolant warning/shutdown

PUMP

• Cornell 4STX Self Prime Centrifugal Pump 
• 4.00” NPTF – suction & discharge connection  
• Ductile Iron ASTM A536, 65-45-12 volute casing 
• Ductile Iron ASTM A536, 100-70-03 impeller 
• Self-cleaning wear plate – mild steel 
• Impeller is a 2 vane, semi-open design
• Single mechanical seal, John Crane Type 2, with tungsten carbide vs silicon carbide faces 
• Replaceable wear plate  
• Pump shaft – 17-4 PH Stainless steel

PUMP PERFORMANCE

• Pump maximum output – 900 gpm (3,407 Lpm) 
• Lift suction – 28 ft. (8.5 m)
• Maximum diameter of solids – 3.00” (76.2 mm) 
• Impeller diameter: 9.75 inches ( cm) 
• Maximum Efficiency (BEP Percent) – 55%  
• BEP Flow – 682 gpm (Lpm) @ 107ft. TDH 
• Total dynamic head – 150 ft (m) 
• Duty Points:
  o 500 gpm @ 52-ft TDH @ 1500 RPM, 55% efficiency, NPSHR 9.02 ft 
  o 753 gpm @ 98.6-ft TDH @ 2100 RPM, 55% efficiency, NPSHR 17.2 ft

SYSTEM CONTROLS

• White LED lighting control panel lighting
• Standard controller – LOFA CP750
  o Large, backlit 4.3 in. (109 mm) LCD display 
      • Displays engine temp, engine speed, fuel level, engine hrs., coolant temp, and oil pressure  
  o Advanced automatic start/stop control for use with two-switch inputs and 4-20mA transducer
  o Configurable high and low set points control start/stop operation
  o Alarm output to signal start warning or shutdown conditions
  o Heavy-duty IP64 water-resistant key switch with booted key
  o RS485 serial interface for auxiliary equipment
  o Electronic e-stop with red LED engagement indicator light

TRAILER

• Flip-tongue design
• Bolt-on, replaceable front tongue mounting plate
• DOT approved LED tail, side, brake, and directional lights
• (4) transportation tie downs capable of handling 3 in. (76.2 mm) trailer straps 
• Safety chains with spring loaded safety hooks 
• 2 in. (50.8 mm) adjustable ball hitch 
• 6000 lb. (2722 kg) torsion axle with surge brakes 
• 2000 lb. (907 kg) tongue jack with footplate
• (2) 2000 lb. (907 kg) top wind jacks, with option to add up to (4)
• ST225/75R15 tubeless tires – 8 ply 
• UV & fade resistant, high temperature cured, black polyester power paint 
• Central lifting point 
• Document holder with operating manual including the AC/DC wiring diagrams

WEIGHT & DIMENSIONS

• Trailer Mounted
  o Dry weight:  3,714 lbs. (1,685 kg)
  o Operating weight:  4,528 lbs. (2,054 kg)
  o Dimensions:  150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m)
• Skid Mount
  o Dry weight:  3,094 lbs. (1,403 kg)
  o Operating weight:  4,528 lbs. (2,054 kg)
  o Dimensions:  91.16 x 66.60 x 61.50 in. (2.32 x 1.69x 1.56 m)