Generac Mobile Products MLT3060

EASY TO USE

• Adjustable, fully rotational mast
• 120V and 240V convenience receptacles
• Lockable cabinet
• DOT running light package on trailer
• Fork guides on the mast and under the trailer
• Engine hour meter
• 750 hour service interval

RELIABLE

• Mitsubishi or Kubota diesel engine
• Marathon generator
• Low oil pressure/high temperature automatic shutdowns
• Protective start limit breaker
• Simple ballast configuration
• Individual light breaker switches & ballast indicator lights
• 1 year Unlimited / 2 year 2,000 hour warranty

TOUGH

• Full tubular steel frame trailer
• 30 ft. (9.14 m) steel mast (horizontal)
• 25 ft. (7.62 m) steel mast (vertical)
• 4 - 1,050 watt metal halide lights
• 4 point outrigger stance withstands winds up to 65 mph (105 kph)
• CSA Approved

ENGINE

• Kubota® D1105-E3BG - liquid cooled, diesel engine, Final Tier 4
  o Standby - 15.4 hp @ 1800 rpm
  o Prime - 13.5 hp @ 1800 rpm
  o 3 cylinder
  o 1.12 L displacement
• Polyethylene Fuel Tank:
  o Fuel Type: Diesel
  o Fuel Capacity: 33.6 gal. (127.19 L) 
  o 3.5 in. (88.9 mm) fill port
• Fuel Consumption:
  o Full Load: 0.50 gph (1.89 Lph)*
  o Lights Only: 0.25 gph (0.95 Lph)*
  o Maximum Runtime (Lights Only): 134 hours*
• 60 Hz engine/generator
• Cooling system capable of operating at 120°F (49°C) ambient 
• 750 hour service interval
• Full flow oil filter, spin on type
• Fuel filter with replaceable element
• Dry type cartridge air filter
• Wind Rating: 65 mph (105 kph)

*Results based on engine manufacturer and field test data after 100-hour engine break-in period and may vary based on factors including age and maintenance of equipment, environmental conditions and fuel density. Consult the Owner's Manual for fuel and maintenance recommendations.

GENERATOR

• Marathon Electric®
  o Brushless 
• 6 kW standby output
• 120/240 VAC – 50/25A
• +/-6% capacitor voltage regulation

ENGINE CONTROLS

• Engraved, aluminum punched and anodized control panel
• Four position keyed switch – glow plugs (preheat, off, run, start)
• Hour meter • Automatic low oil/high temperature shutdown system

ELECTRICAL AND SYSTEM CONTROLS

• Individual floodlight circuits with 15A breakers
• Ballast indicator lights
• 30A start limit breaker (assures no load condition exists before starting)
• Standard individually breakered convenience outlets:
  o (2) 120 VAC 20 Amp GFCI duplex outlets (NEMA 5-20R type)
  o (1) 240 VAC 30 Amp Twistlock outlets (NEMA L6-30R type)
• 440CCA wet cell battery

FLOODLIGHTS

• Four (4) 1050 watt metal halide; 462,000 total lumens
• Oval aluminum reflector
• Tempered glass lens
• Silicone gaskets for moisture and dust protection
• Friction disc mounting for tool less positioning
• Individual floodlight On/Off switches

MAST

• Vertical mast; 25 ft. (7.62 m) maximum extension, 5-section, tubular steel 
• Distinctive angle fixture design for consistent light distribution 
• Electric winch standard 
• 950 lb. (430.91 kg) automatic self-breaking electric winch – easily raises mast vertically
• 359° ground-level rotation with locking system • Coiled mast cord

ENCLOSURE

• Steel enclosure – 14-gauge
  o UV & fade resistant, high temperature cured, white polyester powder paint
  o 68 dB(A) at 23 ft. (7 m) – prime power
• Stainless steel hinges on doors
• Multi-lingual operating/safety decals
• License plate holder with light
• Manual holder with operating manual
• Equipped with single lifting eye and fork pockets

TRAILER

• Front step platform for easy adjustment of light fixtures
• Removable tongue – 48 in. (1219.20 mm) long
• Tubular steel frame – 3/16 in. (4.78 mm) wall 
• (4) 2000 lb. (907.18 kg) adjustable leveling jacks – 4 point stance
• All jacks transport and lock in horizontal position for storage
• Side outriggers – 96.25 in. (2.45 m) span
• 7800 lb. (3538 kg) safety chains with spring loaded safety hooks 
• 2 in. (50.8 mm) ball hitch
• Single wall polyethylene fenders
• DOT approved tail, side, brake, and directional lights
  o Recessed rear lights
• 2200 lb. (997.90 kg) leaf spring axle 
• ST175/80D13 – 6 ply 
• 40.75 in. (1035.05 mm) axle span

WEIGHT & DIMENSIONS

• Dry weight: 1707 lbs. (774 kg) 
• Operating weight: 1923 lbs. (872 kg)
• Mast stowed: 117 x 58 x 111 in. (3.0 x 1.5 x 2.8 m)